Specifications
|
|
Power Supply (V)
|
100-240 AC, 50/60 HZ
|
|
Power Consumption (W)
|
285 (0.08) in standby mode with fan stopped)
|
Display
|
|
Panel Type
|
• LCD1 panel • Panel Size: 18.7 mm diagonal (16:9 aspect ratio) • Display method: Active matrix • Pixels: 2,073,600 (1,920 x 1.080) x 3, total of 6,220,800 pixels
|
|
Lamp (W)
|
200 UHM lamp2
|
|
Replacement Lamp
|
See optional accessories
|
|
Brightness
|
2,000 lumens3,4
|
Lens (Throw distance)
|
• Powered zoom/focus lenses (1.35:1-2.7:1), F 1.9-3.2, f 22.4-44.8 mm • 1.16-18.08 m
|
|
Contrast Ratio
|
300,000:15 (full on/full off)
|
|
Resolution (pixels)
|
1,920 x 1,080
|
|
Projection Size (m)
|
2D projection: 1.02-7.62 3D projection: 1.02-5.08
|
|
Optical Axis Shift6
|
Vertical: ±100%, horizontal: ±26%
|
General
|
|
Terminals
|
HDMI IN HDMI connector × 3 • HDMI™ (Deep Color, x.v.Color™7, CEC8) • HDCP compliant • supports HDAVI Control Version 5 COMPUTER (RGB) IN • D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1) COMPONENT IN • RCA pin × 3 (YPBPR/YCBCR) TRIGGER IN/OUT • M3 × 2, 12 V, max. 100 mA (input/output/3D transmitter output selectable using onscreen menu)
|
|
Dimensions (W x H x D mm)
|
470 × 137 × 345 (lens and legs not included)
|
|
Weight (kg)
|
Approx. 8.7 kg
|
|
Operating temperature
|
0°–40°C
|
|
Operating humidity
|
20%–80% (no condensation)
|
|
Remote Control Unit
|
• Power supply: 3 V DC (R6/AA type battery × 2) • Operation range: Approx. 7 m when operated from directly in front of the signal receptor • Dimensions (W x H x D mm): 470 x 137 x 345 (lens and legs not included) • Weight: Approx. 125 g (including batteries)
|
Accessories
|
|
Inclusive
|
• Power cord (× 1) • Wireless remote control unit (× 1) • Batteries for remote control (R6/AA type × 2) • Lens cover (× 1)
|
|
Optional
|
• Replacement lamp unit ET-LAA310 • Ceiling mount bracket for high ceilings ET-PKA110H • Ceiling mount bracket for low ceilings ET-PKA110S • 3D eyewear TY-EW3D2L, TY-EW3D2M, TY-EW3D2S • 3D IR transmitter ET-TRM110
|
|
|
*Specifications subject to change without notice
|
|
1 The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology to provide the finest possible image. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
|
|
2 The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions
|
|
3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
|
|
4 In dynamic mode, with dynamic iris on.
|
|
5 In cinema 1 mode, with dynamic iris on.
|
|
6 Shift range is limited during simultaneous horizontal and vertical shifting.
|
|
7 Effective in Rec. 709 picture mode.
|
|
8 CEC is an abbreviation for Consumer Electronics Control. Operation may not be possible with some connected equipment or settings.
|
|
9 Lens and legs not included.
|
|
10 Average value. May differ depending on models.
|